Results You searched for: Cadet F Series Electric Baseboard Heater. The practical choice for bedrooms Results Displayed: 1 - 34 of 34
Cadet F Series Electric Baseboard Heater.
The Cadet electric baseboard heater is the number one choice for low cost installation, and the quiet operation makes it the preferred heater for bedrooms, utilizing convection to circulate air. Thermostat required. Choose a baseboard mount Cadet BTF unit, or an electronic line-voltage wall thermostat for ultimate comfort and control.
Warranty: Life Time Warranty on Element
Easy installation with pre-punched case at 1" intervals
Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
Powder coated paint provides a smooth, durable finish resistant to corrosion, scratches, fading, and wear
Rugged steel construction
Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
Oversized high temperature limit switch with full length capillary sensor tube for added safety
Steel-sheathed element offers excellent heat transfer and high quality durability backed with a lifetime guarantee
Works Best When Placed Under a Window
The electric baseboard heater uses convection to circulate air. By superior design and proper placement under a window area, the electric baseboard case causes air to flow naturally. The cold air falls from the window area as the warm air rises from the heater, causing the air to tumble gently throughout the room. Cadet recommends a wall-mounted thermostat for optimum performance, or you may prefer the convenience of an optional field mount thermostat kit.
Ordering Information: Standard voltage is 240/208 unless otherwise indicated. All Cadet baseboard heaters require a thermostat. For optimum comfort use a Cadet electronic thermostat or a dual diaphragm thermostat. 8F2500 models are 312 watts per foot. Standard dual rated 240/208 volt models are 250 watts per foot at 240 volt, and low density 187 watts per foot at 208 volt.
Accessories: Choose the Smart-Base™ electronic, programmable thermostat, designed specifically for Cadet “F” Series electric baseboards (208-240 volt only), for precise temperature control and increased energy savings. A single pole (BTF1) or double pole (BTF2) bimetal thermostat is also available to install into either end of the baseboard heater. To switch between the Cadet baseboard heater and a cooling unit, the LTF240 can be utilized. Inside corner connectors are available to fit various designs, such as corner window areas.
Architectural Information: Electric baseboard heaters shall be UL Listed, factory rated at 120V, 208V, and dual rated 208V/240V. Element shall be steel sheathed calrod element with channel shaped aluminum fins. A full length capillary sensor tube shall be an integral part of each unit. Case, cover, and deflector shall be made of 24 gauge steel with 20 gauge junction boxes containing a grounding screw. All metal pieces shall be finished with a powder coat paint system.
Technical Information: Baseboard heaters work best when placed under a window and at least 12” away from furniture or other objects. Keep at least a 12" minimum from objects hanging above (i.e., drapes). Do not install below electrical outlets. The electric baseboard heater may be placed directly on the floor and mounted to the wall. There are only a few exceptions listed in the installation instructions. An optional Cadet MTX mounting tool is helpful for installing the heater. Originally designed for mounting baseboard heaters, its applications are unlimited.
Product Dimensions: 6.75"H x 2.5"D x Length Varies