Results You searched for: Qmark Floor Drop In Heaters Results Displayed: 1 - 3 of 3
Qmark FDI Floor Drop-In Heater
Description
Type FDI Floor Drop-In Heater. Quiet-for living rooms, dining rooms, even bedrooms. Mounts between floor joists in either direction (parallel or perpendicular to joists). Heavy-duty grille can take almost any type abuse!
Features
Dimensions: 14" length x 7 1/4" width x 6 5/8" depth
A "versatile, universal size," draft barrier heater for large window areas, sliding glass doors, entryways, hallways, open stair wells. Produces a flow pattern of warm air five feet wide (four feet above floor).
Both the FDl1500 and FDl1504 are adaptable from 1500W to 750W. Additionally, the FDl1504 may be operated at 208 volts for an output of 1125W or 563W.
Quick, simple installation. Mounts between floor joists in either direction (parallel or perpendicular to joists). Rough-in separate housing... then simply insert "plug-in" type heater element and fan assembly.
Concrete accessory kit (housing pan cover and two stakes) aids installation of heater in concrete.
Thermostat accessory kit (optional) easily installed in heater (screwdriver adjusted thru grille). When heater is installed for overall room heating, use a wall thermostat.
Automatic overheat thermal protector and thermal fuse standard.
Heavy-gauge steel housing.
Sandalwood baked enamel grille finish.
80 CFM
U.L. listed
Limitations:
Do not install in bathroom or other areas where water may enter heater unit. Do not locate where air flow may be obstructed (under drapes, behind doors, etc.) Keep short sides at least 3' from side walls and long side 3" min. from side walls. Do not install in ceiling or wall.
Sandalwood
;){kind=logo}
;)
