Questions? 1-800-442-2581
or 1-616-784-1121
8:00 am - 5:00 pm M-F EST
8:00 am - 1:00 pm Sat. EST
 
 
Share |
 
Refine Results Clear All
Product Types
Fan Forced Heaters
Wall Heaters
Voltage
120 Volt
Phase
1 Phase
Wattage
1000 Watt
1250 Watt
1500 Watt
250 Watt
500 Watt
750 Watt
Price
$250 to $500
$500 to $1000
Width
12.5 Inch
Height
6 Inch
Depth
4.5 Inch
Color
Stainless Steel
Vendors
King Electric
Product Types
Select Product Types Clear
 Fan Forced Heaters (2)
 Wall Heaters (2)
Voltage
Select Voltage Clear
 120 Volt (2)
Phase
Select Phase Clear
 1 Phase (2)
Wattage
Select Wattage Clear
 1000 Watt (2)
 1250 Watt (2)
 1500 Watt (2)
 250 Watt (2)
 500 Watt (2)
 750 Watt (2)
More... Show First 5 Values
Price
Select Price Clear
 $250 to $500 (1)
 $500 to $1000 (1)
Width
Select Width Clear
 12.5 Inch (2)
Height
Select Height Clear
 6 Inch (2)
Depth
Select Depth Clear
 4.5 Inch (2)
Color
Select Color Clear
 Stainless Steel (2)
Vendors
Select Vendors Clear
 King Electric (2)
$25 or Less Products
Baseboard Space Heaters
Camp, Fish, Hunt & RV
Church Baptistry Heaters
Clearance & Specials
Comfort Space Heaters
Construction Heaters
Controls & Transformers
Cooling/Air Conditioning
Fans/Blowers/Ventilation
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers (Washrooms)
Heaters & Accessories
Heating Cable & Mats
High Temp. Insulation
High Temp. Wire & Acces.
Industrial Heating Products
Infrared Radiant Heaters
Lighting & Flashlights
Manufacturers (Vendors)
Nichrome Wire Coils & Acc
Patio Heaters (Radiant)
Pipe Freeze Protection
Portable Space Heaters
Replacement Repair Parts
Roof & Gutter Deicing
Snow & Ice Removal
Tapes-Fiberglass/Aluminum
Temperature Sensors
Thermostats & Accessories
Tools, Instruments & Gear
Unit Heaters (Blower)
Wall Heaters (Fan-forced)
Wall Panel Convectors
Water Heaters (Tankless)
ITEM # QTY.
Results
You searched for: Stainless Steel DAW Series 120 Volt Wall Heaters
Results Displayed: 1 - 2 of 2

King Electric Stainless Steel DAW Series 120 Volt Wall Heaters


 


Description


A heavy duty industrial switch mounted on the grill allows easy choice of 7 different power settings with ease. Use where higher wattage is not required during unoccupied periods and freeze protection may be achieved with energy savings. Quiet operating tangential blower and commercial grade element make the Dial-A-Watt the heater of choice for people on the move. Typical installations are boats and pleasure crafts where corrosion resistant construction is required. By providing air movement and dry heat, must and mold odors are reduced.


During use, the heater load (Amperage) can be adjusted to the shore power cord that is feeding the vessel. This prevents damage to plugs and receptacles due to over loading. During unoccupied periods, wattage can be adjusted to the correct level for freeze protection.


 


Features



  • 304 Stainless Steel Pic-A-Watt® Element

  • C-Frame Motor

  • Squirrel Cage Blower

  • Quiet Running

  • Flange Mount Wall Can

  • Multiple Wattage Selection

  • 20 Gauge Clear Powder Coated Grill with die formed square corners

  • Green Pilot Light indicates when heat is on

  • Bimetallic limit turns the element off when an over temperature condition occurs and automatically

    resets when the normal temperature returns.

  • Manual Reset Limit turns heater off and is reset by thermostat. 1-Pole or 2-Pole unit mount thermostat 45°- 80°F

  • Optional Surface Wall Box


Ratings: Heaters shall be available in wattages of 250 to 2,250 at 120, 208, or 240 volts.



Blower and Motor: A tangential cylindrical blower, delivering 70 CFM, shall be driven by a shaded pole, permanently lubricated, C-frame type motor with impedance protection and sealed bearings. Motors shall be the same voltage as the heater.



Elements: Elements assemblies shall be non-glowing design. Element assemblies shall consisting of steel sheathed heating tubes in a furnace brazed, plate finned, block design. Each sheathed tube shall contain coiled a Ni-Chrome wire, embedded in an insulator of magnesium oxide.



Thermal Overload: Heaters shall be equipped with thermal overload protection, which disconnects elements in the event normal operating temperatures are exceeded. The thermal overload protection

device shall automatically reset when normal operating temperatures are reached or manually reset by the thermostat.



Wall Can: The wall can shall be stainless steel and shall contain a minimum of three (3) knockouts through which power leads are brought. The wall can shall have a depth gauge or flange mount, and a factory installed copper grounding wire. Minimum Clearance to Floors and Sidewalls. Zero clearance to combustibles.



Grill: 304 Brushed Stainless Steel, Clear Powder Coating



Approval: Heaters shall be listed and approved by Underwriters Laboratories or equal.



Selector Switch: Shall provide 7 wattage settings adjustable from switch on front of heater.



Indicator: Light designates heater is operating


















King Electric Catalog Page
Installation Instructions
Item CodeDescriptionVendorQuantity
KINGELECTRIC19255
DAW1215-SS-ST King Electric Wall Heater
King Electric Wall Heater - DAW (Dial-A-Watt) Series - Dial A Watt Switch - 120 Volt With Wattages of 250/500/750/1000/1250/1500 Watt - Stainless Steel Construction - Includes Wall Can and Stainless Steel Grill - Slope Top
King Electric
KINGELECTRIC19251
DAW1215-SS King Electric Wall Heater
King Electric Wall Heater - DAW (Dial-A-Watt) Series - Dial A Watt Switch - 120 Volt With Wattages of 250/500/750/1000/1250/1500 Watt - Stainless Steel Construction - Includes Wall Can and Stainless Steel Grill
King Electric