EasyHeat ILH Series Inside The Pipe Freeze Protection Heating Cable

Description

The EASY HEAT® IN-LINE HEATER provides economical, effective in-pipe freeze protection for water supply lines. The cable consists of dual conductor resistance wire with P.V.C. insulation, continuous ground braid, and clear food grade outer P.V.C. jacket. A 12 Amp energy saving thermostat c/w Ground Fault Circuit Interrupter (G.F.C.I.) receptacle is also included.

Features

• Designed For Use Only in 1" or 1.25" Diameter Polyethylene Water Pipes. Adapter Kits (Part No. 10561-001) Available For 1" Polyethylene Water Pipes


• Energy Saving Thermostat With a 10 Foot Sensor Senses The Pipe Temperature and Turns The Cable On/off As Required


• Protected by Ground Fault Circuit Interrupter GFCI with Test/Reset and Pilot Light to Ensure Safe Operation


• CSA Approved For Drinking Water Supply


• Comprehensive Length Selection From 10 to 270 Foot


• Non-Restrictive Fitting (No 90° Turn) T-Assembly Utilizes The Philmac Fitting to Eliminate The Potential Problems Adapter Fittings Can Create


• Will Not Burn Through Pipe If Dryout Cccurs (See Instructions)


• User Friendly Plug-In 120 Volt Operation (5W/ft) to Plug in The System to Any 120 Volt Outlet


• Maximum Amperage Draw is 11.3 Amps (On 270 Foot Long Model)


• An Inside-The-Pipe Heater Cable That Provides an Economical Alternative to Maintaining Running Water All Winter Long


• Can be Used in Insulated Pipes


• The Package Doubles as a Dispensing Reel Ensuring a Smooth Transfer From Reel to Pipe and Cable Flexibility Ensures Easy Installation, The Cable Can Easily be Pulled Around Sharp Elbows and Curves


• Water Supply Line Applications Only (Not Designed For Drain Lines or Other Applications)