Results You searched for: ETI GPT-3 Tracon Pipe Freeze Protection Thermostat with GFEP, 120-277 VAC UL / CSA Results Displayed: 1 - 3 of 3
ETI GPT-3 Freeze Protection Thermostat with GFEP, 120-277 VAC U-L / CSA
Automatic Temperature Control for Freeze Protection Applications GPT-3 Trace Control
The patented and patent pending GPT–3 Freeze Protection Thermostat is engineered to fit in between electromechanical thermostats and high-end general purpose single and multiple channel temperature controls. It offers performance features that cannot be provided by simple electromechanical thermostats while providing lower cost and operational simplicity when compared to the high end products. The GPT–3 is ideally suited for cost sensitive applications that would otherwise go unmonitored.
The computerized GPT–3 has a calibrated adjustment for setting the control temperature between 41° and 77°F (5° and 25°C). This range is ideal for freeze protection applications without being so wide that accidental maladjustment could prevent freeze protection.
GPT–3 features enhance heating system safety and reliability without sacrificing either operational simplicity or energy efficiency. For example, the GPT–3 monitors heating cables continuously so damage occurring during the summer months is alarmed when it happens rather than waiting until heat is needed. Both constant wattage and self-limiting heaters are accommodated.
The GFEP uses digital filtering to minimize false trips. Although preset for 30 mA, the GFEP can be set to trip on currents as high as 120 mA to avoid nuisance tripping on longer cable runs. The GPT–3 checks the GFEP for proper operation any time that it is tested or reset. The GFEP and heater cable are both tested automatically every 24 hours for proper operation and freedom from ground leakage for an extra margin of safety.
Normally, the GFEP must be reset manually after being tripped. However, some critical service applications, such as fire sprinkler protection, consider a ground fault condition of secondary importance. The GPT–3 can be set to meet this requirement by resetting automatically.
The GPT–3 checks its control temperature sensor. Upon detecting a failure, it prevents heater operation. A second sensor checks the temperature at the far end of the cable when using a self limiting heater. Upon detecting sensor failure, the GPT–3 alarms the fact and continues heater operation.
The GPT–3 checks its contactor and alarms stuck or open contacts. A contactor failure causes uncontrolled heater operation.
The GPT–3 has features making it simple to install and easy to operate. It automatically selects operating voltages of 120, 208, 240 or 277 volts. The temperature sensors are NEC Class 2 devices that can be located up to 2,000' (610m) away from the GPT–3. The NEMA 3R rating provides location flexibility as does its -40° to 136°F (-40° to 58°C) operating temperature range. The nonmetallic enclosure features a lockable transparent cover which prevents tampering while displaying GPT–3 operational information for operational personnel.
Area of use Nonhazardous locations
Range 41° to 77°F (5° to 25°C)
Dead band 2°F (1°C)
Supply 120, 2080, 240 or 277 volts auto-selected
Heater load 30 amps maximum
Alarm relay Isolated SPDT 1 amp class 2 contact
Indicators Supply (green) Power supplied
Heater (yellow) Call for heat
GFEP (red) Ground fault occurring or has occurred Contactor failure
Fault (red) Temperature sensor failure Power-on self-check failure
Setting 30 mA default, 60, 90, 120 mA selectable
Reset Manual default, automatic selectable
Auto-test Every 24 hours (estimated)
Heater Monitoring Choices Self-limiting default, constant wattage selectable No power Heater failure
Alarm relay Contactor failure Ground fault or GFEP failure Temperature sensor failure
Temperature limits Operating -40°F to 136°F (-40°C to 58°C