Questions? 1-800-442-2581
or 1-616-784-1121
8:00 am - 5:00 pm M-F EST
8:00 am - 1:00 pm Sat. EST
 
 
Share |
 
Refine Results Clear All
Product Types
Hand Dryers
Voltage
120 Volt
208 Volt
220 Volt
230 Volt
240 Volt
277 Volt
Phase
1 Phase
Price
$150 to $250
Vendors
Excel
Product Types
Select Product Types Clear
 Hand Dryers (10)
Voltage
Select Voltage Clear
 120 Volt (4)
 208 Volt (2)
 220 Volt (2)
 230 Volt (2)
 240 Volt (2)
 277 Volt (2)
More... Show First 5 Values
Phase
Select Phase Clear
 1 Phase (10)
Price
Select Price Clear
 $150 to $250 (10)
Vendors
Select Vendors Clear
 Excel (10)
$25 or Less Products
Baseboard Space Heaters
Camp, Fish, Hunt & RV
Church Baptistry Heaters
Clearance & Specials
Comfort Space Heaters
Construction Heaters
Controls & Transformers
Cooling/Air Conditioning
Fans/Blowers/Ventilation
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers (Washrooms)
Heaters & Accessories
Heating Cable & Mats
High Temp. Insulation
High Temp. Wire & Acces.
Industrial Heating Products
Infrared Radiant Heaters
Lighting & Flashlights
Manufacturers (Vendors)
Nichrome Wire Coils & Acc
Patio Heaters (Radiant)
Pipe Freeze Protection
Portable Space Heaters
Replacement Repair Parts
Roof & Gutter Deicing
Snow & Ice Removal
Tapes-Fiberglass/Aluminum
Temperature Sensors
Thermostats & Accessories
Tools, Instruments & Gear
Unit Heaters (Blower)
Wall Heaters (Fan-forced)
Wall Panel Convectors
Water Heaters (Tankless)
ITEM # QTY.
Results
You searched for: Excel Lexan Cover Hand Dryers
Results Displayed: 1 - 10 of 10
Dimensions: 12" long x 9 3/4" high x 8" deep-, (305 mm x 248 mm x 203 mm)

Weight: 13 lbs. (5.9 Kgs.)


Specifications:

Dimensions: 12" long x 9 3/4" high x 8" deep-, (305 mm x 248 mm x 203 mm)

Weight: 13 lbs. (5.9 Kgs.)
Construction:

Cover shall be a one-piece molded Lexan® 940, with the color uniformly throughout and fastened by two chrome-plated tamper-proof bolts to a cast zinc alloy wall plate.

Wall plate shall be equipped with (3) 7/8' (22 mm) diameter holes. one of which shall be suitable for use with surface conduit, for ease of wiring.

Dryers shall have a chrome-plated. die-cast zinc blower vent/grill (air outlet) which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer.

All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements.

Entire mechanism shall be Internally grounded.

HO-BL Model: Includes a chrome-plated push button assembly mounted onto front of cover.


Mechanism:

Motor for 60 Hz Units shall be a brushless 1/10 H.P. 3400 R.P.M. with self-lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self resetting thermal switch.
Motor for 50 Hz Units shall be a universal 1/10 HP. 4200 R.P.M. at rated load with sealed lubricated ball bearings. It shall be insulated by a resilient mounting. Motor is thermally protected.

Fan shall be a large. single inlet centrifugal type for maximum capacity and shall deliver a minimum of 180 C.F.M. Fan shall be mounted directly on the motor shaft, and fan and motor unit shall be insulated from dryer with a resilient rubber mounting to obtain maximum sound and vibration dampening effect

The heating element of Nichrome wire shall be side mounted on the intake, thereby being vandal proof. It shall be protected by an automatic resetting circuit breaker (25 Amp). which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of approximately 145° F (63° C) at 72° F (22° C) ambient room temperature at the outlet.

HO-IL Model: A control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under air outlet with a lock out of approximately 90 seconds if hands are not removed.

HO-BL Model: A sealed electronic timer will operate the hand dryer for 30 seconds after push button actuation.


Limited Warranty:

The dryer shall be guaranteed to be free of defects for a period of five (5) years (three years on control assembly and sensor). Warranty shall include factory performed labor, as well as the repair or exchange of parts at manufacturer's option.










Cost Savings Analysis Worksheet
Item CodeDescriptionVendorQuantity
EXCEL10013
HO-IL-277 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Automatic Sensor - 277 Volt - 8 Amp 60 Hz
Mor Electric
EXCEL10081
HO-IL-220/240 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Automatic Sensor - 220/240 Volt - 10 Amp 60 Hz
Excel Dryer Inc
EXCEL10080
HO-IL-208/230 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Automatic Sensor - 208/230 Volt - 10 Amp 60 Hz
Mor Electric
EXCEL10079
HO-IL-120-20 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Automatic Sensor - 120 Volt - 20 Amp 60 Hz
Excel Dryer Inc
EXCEL10078
HO-IL-120-15 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Automatic Sensor - 120 Volt - 15 Amp 60 Hz
Excel Dryer Inc
EXCEL10076
HO-BL-277 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Push Button Activated - 277 Volt - 8 Amp 60 Hz
Excel Dryer Inc
EXCEL10077
HO-BL-220/240 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Push Button Activated - 220/240 Volt - 10 Amp 60 Hz
Mor Electric
EXCEL10075
HO-BL-208/230 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Push Button Activated - 208/230 Volt - 10 Amp 60 Hz
Excel Dryer Inc
EXCEL10010
HO-BL-120-20 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Push Button Activated - 120 Volt - 20 Amp 60 Hz
Mor Electric
EXCEL10074
HO-BL-120-15 Excel Hand Dryer
Excel Lexan Series Model Hand Dryer - Surface-Mounted - Push Button Activated - 120 Volt - 15 Amp 60 Hz
Excel Dryer Inc