Questions? 1-800-442-2581
or 1-616-784-1121
8:00 am - 5:00 pm M-F EST
8:00 am - 1:00 pm Sat. EST
Share |
Air Circulator Fans
Air Doors/Air Curtains
Baptistry Heaters for Churches
Baseboard Space Heaters
Bathroom Fans
Blowers (Portable Utility)
Camp, Fish, Hunt & RV
Ceiling Fans (Commercial/Ind)
Clearance & Specials
Comfort Space Heaters
Construction Heaters
Controls & Transformers
Drum Blowers (Portable)
Evaporative Coolers
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers (Washrooms)
Heaters & Accessories
Heating Cable & Mats
High Temp. Wire & Acces.
Industrial Heating Products
Infrared Radiant Heaters
Lighting & Flashlights
Loading Dock Fans
Manufacturers (Vendors)
Nichrome Wire Coils & Acc.
Patio Heaters (Radiant)
Pest/Bird/Animal/Insect Control
Pipe Cable (Constant Wattage)
Pipe Cable (Self-Regulating)
Pipe Trace Freeze Protection
Portable 120V Space Heaters
Portable 240V Space Heaters
Replacement Repair Parts
Roof & Attic Ventilators
Roof & Gutter Deicing Cable
Roof Cable (Constant Wattage)
Roof Cable (Self-Regulating)
Snow & Ice Removal
Tapes (Adhesive)
Temperature Sensors
Thermostats & Accessories
Tools, Glue, Lights & Gear
Unit Heaters (Blower)
Wall Exhaust Fans
Wall Heaters (Fan-forced)
Wall Panel Convectors
Water Heaters (Tankless)
Whole House Fans
You searched for: Heat Trak 120 Volt Snow Melting Mats
Results Displayed: 1 - 1 of 1
The HeatTrak® Traction Mat is designed to act as an entrance mat. The HeatTrak® Traction Mat is built with non-slip, UV protected rubber, and is designed to be left out for the entire winter season. The HeatTrak® products melt up to 2" of falling snow per hour and cost as little as 60 cents a day to operate (depending on the cost per kilowatt hour).

To ensure the product's reliability, The HeatTrak® Mat is built and tested according to the UL499 and CSA E335-1 electrical standard before leaving the HeatTrak® facility.

The HeatTrak® Mat is an alternative to more traditional forms of snow and ice removal, such as shoveling, snow blowing, harsh chemicals, and embedded systems. Unlike the alternatives, however, The HeatTrak Mat® does not require the effort of shoveling or snow blowing, preserve surfaces from harsh chemicals, and continuously melts snow and ice keeping surfaces constantly clear and safe. In addition, The HeatTrak Mat® is less expensive to install than embedded snow melting systems and their portability allows them to be used in places where embedded elements cannot be used. The HeatTrak® products are extremely durable and are designed to be left outside for the entire winter season.

* Thickness - ¼ Inch
* Chevron Height - 1/8 Inch
* Minimum Bend Radius - 3 Inch
* Material - Reinforced UV Stabilized Natural Rubber

Heating Element:
* Voltage - 120 Volt
* Power Density - 35 Watts/SqFt

Inline Safety Device/Power Cord:
* Service Voltage - 120 VAC
* Circuit Breaker Rating - 15 Amp
* GFCI Trip Level - 6ma
* Cold Lead Length - 6 Ft
* Cold Lead Gauge - 14/3 SJTW

* Type - Brass
* Size - 7/16 Inch (No. 3)
* Spacing - 3ft Nominal

* Minimum Installation Temperature of -20F
* Use Only In Ordinary (Non-Hazardous) Areas. Do Not Expose To Chemicals.

Installation Instructions
Item CodeDescriptionVendorQuantity
HTM24-5 24inx5ft 120V HeatTrak SnowMat
HeatTrak Portable Thermoplastic Snow Melting Traction Mat - Industrial Electric Heated Walkway Mat - 24 inch x 5 ft - 120 Volt 300 Watt 2.5 Amps - 6 foot Power Cord & Plug - In Line Safety Device - Snow melting rate: 2" per hour - 3/8" Grommets
HeatTrak, LLC