Questions? 1-800-442-2581
or 1-616-784-1121
8:00am-5:00pm M-F (Eastern Time)
 
 
Share |
 
Refine Results Clear All
Product Types
Forced Air Heaters
Plenum Heaters
Voltage
208 Volt
Phase
1 Phase
Wattage
30 KW
40 KW
60 KW
80 KW
Price
$1000 +
Vendors
King Electric
Product Types
Select Product Types Clear
 Forced Air Heaters (4)
 Plenum Heaters (4)
Voltage
Select Voltage Clear
 208 Volt (4)
Phase
Select Phase Clear
 1 Phase (4)
Wattage
Select Wattage Clear
 30 KW (1)
 40 KW (1)
 60 KW (1)
 80 KW (1)
Price
Select Price Clear
 $1000 + (4)
Vendors
Select Vendors Clear
 King Electric (4)
$25 or Less Products
Baseboard Space Heaters
Camp, Fish, Hunt & RV
Church Baptistry Heaters
Clearance & Specials
Comfort Space Heaters
Construction Heaters
Controls & Transformers
Cooling/Air Conditioning
Fans/Blowers/Ventilation
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers (Washrooms)
Heaters & Accessories
Heating Cable & Mats
High Temp. Insulation
High Temp. Wire & Acces.
Industrial Heating Products
Infrared Radiant Heaters
Lighting & Flashlights
Manufacturers (Vendors)
Nichrome Wire Coils & Acc
Patio Heaters (Radiant)
Pipe Freeze Protection
Portable Space Heaters
Replacement Repair Parts
Roof & Gutter Deicing
Snow & Ice Removal
Tapes-Fiberglass/Aluminum
Temperature Sensors
Thermostats & Accessories
Tools, Instruments & Gear
Unit Heaters (Blower)
Wall Heaters (Fan-forced)
Wall Panel Convectors
Water Heaters (Tankless)
ITEM # QTY.
Results
You searched for: CKL Series 208V 1PH Plenum Heaters
Results Displayed: 1 - 4 of 4
The CKL model is a special application unit heater that is approved for use in concealed areas of a building. It is specifically designed for High-Rise Buildings, Office Buildings, Factories, Auto Body Shops, Food Processing Plants, Plating Shops, Machine Shops.

This heater may be installed in an inaccessible area such as between a concrete ceiling and a drop tile ceiling, in an open plenum or ducted system. The heater is designed to withstand a dirty, dusty, moist or mildly corrosive environment. It is not intended for use where flammable vapors, gases, liquids or other combustibles are present.




* Spiral Steel Fin Element
* Double Inlet Blower
* Totally Enclosed 3R Motor
* Nema 12 Construction
* Steel Spiral Fin Element
* Adjustable Louver Hood
* Control Options
* Optional Nema 4XThermostat
* Optional 120 Volt Control
* Optional Element Step Control
* Optional Disconnect Switch
* Optional Motor HP Upgrades
* Optional No Diffuser Louvers
* Optional Remote Fuse Panel


Construction: The heater case is fabricated from high tensile electro-galvanized steel that is welded together forming a durable uni-body cabinet. Heater is finished with a rust inhibiting epoxy coating.

Adjustable Outlet Louver: Louvers direct air up or down as needed for the heating application.

Intake and Discharge Screen: Heavy gauge steel screen protects against foreign objects entering the heater. A 1 Inch x16 Inch x 20 Inch filter is provided to prevent dirt and dust build up in the heater.

Nema 12 Wiring Compartment: The wiring compartment is sealed with a ¼ Inch Poron high density polyurethane gasket. This provides excellent protection against moisture, dust and dirt from invading
the electrical components and wiring. All optional control accessories are nema 12 rated.

Spiral Fin Elements: The metal sheath element is brazed with spiral fins and then molded into a coil configuration. This combination produces the best heat transfer while eliminating the potential for hot spots by positioning the element in the maximum airflow stream.

Blower & Motor: Totally enclosed outdoor ball bearing fan motor. Permanently lubricated, class B insulation, auto protected, permanent split capacitor and 60 C Ambient. Large capacity dual inlet blower handles high static pressure and moves large air volume. Motor leads are enclosed in a seal tight raceway to prolong equipment life and reduce maintenance.

Air Intake Temperature Control: A built-in thermostat located at the intake blower is factory set at 100 F which prevents the heater from operating when the ambient temperature exceeds this limit. This will prevent the heater from wasting energy, and is an extra measure of safety.

Auto-Reset Thermal Cutout: Power is diconnected from the element if an over heated condition occurs. The fan continues to run to dissipate excess heat from the element. The element is reenergized automatically when the normal operating temperature returns.

Internal Controls: Magnetic contactors are standard on all units. A transformer is provided for 24 volt control. This enables the customer to use a standard low voltage thermostat. Sub circuit fusing is provided when the heater ampacity exceeds 48 amps to comply with NEC standards. A fan delay is provided standard on models 12.5-KW and above to dissipate residual heat from the heating elements.

Easy Wiring: A large wiring compartment with easy access allow for a quick installation.

Listing: Heater is approved for installation in enclosed plenum areas under ETL File Number 50050.

Mounting: The CKL heater comes with two brackets welded on top to be hung from the ceiling or beam using threaded rod.


Factory Installed Options:

Thermostat: A Nema 4X Thermostat can be provided on the heater.

120 Volt Control: Control components modified to accept 120V control. Circuit outboard supply customer provided.

Element Step Control: The CKL heater has from 1 to 8 steps standard depending upon the total KW load. Additional steps can be added for improved energy management, refer to table.

Disconnect Switch: Consult factory on CKL models.

Motor HP Upgrades: Standard models are listed with motors that will provide sufficient CFM for the KW they are designed for. Where additional CFM is required a larger motor and blower can be provided.

No Diffuser: Used when the heater will be connected to ductwork.

Remote Fuse Panel: A remote fuse panel can be provided when the heater is mounted in an inaccessible area. This allows the fuses to be located in an electrical closet where they can be serviced.












King Electric Catalog Page A
King Electric Catalog Page B
Item CodeDescriptionVendorQuantity
KINGELECTRIC20200
CKL2030-1-3-3 King Electric Plenum Htr
King Electric Plenum Heater - CKL Series - 208 Volt 1 Phase 30KW - 3 Stage - 3000CFM - 31.6 Deg F Temp Rise - Spiral Steel Fin Element - 24VAC Control Voltage - Nema 12 Construction - Air Intake Temp Control Factory Set To 100 DegF For Added Safety
King Electric
KINGELECTRIC20209
CKL2040-1-4-3 King Electric Plenum Htr
King Electric Plenum Heater - CKL Series - 208 Volt 1 Phase 40KW - 4 Stage - 3000CFM - 42.1 Deg F Temp Rise - Spiral Steel Fin Element - 24VAC Control Voltage - Nema 12 Construction - Air Intake Temp Control Factory Set To 100 DegF For Added Safety
King Electric
KINGELECTRIC20218
CKL2060-1-6-3 King Electric Plenum Htr
King Electric Plenum Heater - CKL Series - 208 Volt 1 Phase 60KW - 6 Stage - 3000CFM - 63.2 Deg F Temp Rise - Spiral Steel Fin Element - 24VAC Control Voltage - Nema 12 Construction - Air Intake Temp Control Factory Set To 100 DegF For Added Safety
King Electric
KINGELECTRIC20227
CKL2080-1-8-3.3 King Electric Plenum Htr
King Electric Plenum Heater - CKL Series - 208 Volt 1 Phase 80KW - 8 Stage - 3300CFM - 76.6 Deg F Temp Rise - Spiral Steel Fin Element - 24VAC Control Voltage - Nema 12 Construction - Air Intake Temp Control Factory Set To 100 DegF For Added Safety
King Electric