Furnish and install Electric Forced Air Heaters, Series 3380 where specified. The heaters shall be constructed of a heavy gauge steel housing. The roughin dimensions are 19-3/16” wide x 4” deep. The finish shall be baked-on powder coat in Ceiling White color. The units shall be available in ratings from 1500 through 4800 Watts with an optional factory installed single pole

thermostat.

The heaters shall have a low speed 600-RPM motor, which drives a vane axial blower to deliver a quite 175 CFM’s of down flow air. The heating element shall be of the block finned type with large, parallel steel fins for quick heat transfer. Unit shall have as standard, a manual reset capillary type limit control, for added safety. Unit weight 22 pounds.

Recess, Surface, Or “T” Bar Mounting

• Fan purge circuit (requires 2 wire control circuit when remote wall thermostat is used with the unit)

• Disconnect switch

• White powder coated 18 Gauge steel grill

• Manual reset thermal limit

• Steel block fin element

• Vane axial fan blade:

1.5KW - 4.0KW units: 700 RPM motor; 175 CFM 4.8KW units: 900 RPM motor; 200 CFM

• Rough in dimensions:

14 3/16” wide x 19 5/16” high x 4” deep

• Grill dimensions:

15 3/8” wide x 20 9/64” high

• Optional factory installed tamper resistant thermostat