Results You searched for: EasyHeat ILH Inside The Pipe Freeze Protection Heating Cable for Use Only in 1" or 1.25" Dia. Polyethylene Water Pipes Results Displayed: 1 - 17 of 17
EasyHeat ILH Series Inside The Pipe Freeze Protection Heating Cable
Inside the pipe heating cable maintains water supply throughout the winter in your home, cottage, or barn.
The EASY HEAT® IN-LINE HEATER provides economical, effective in-pipe freeze protection for water supply lines. The cable consists of dual conductor resistance wire with P.V.C. insulation, continuous ground braid, and clear food grade outer P.V.C. jacket. A 12 Amp energy saving thermostat c/w Ground Fault Circuit Interrupter (G.F.C.I.) receptacle is also included.
Designed For Use Only in 1.25" Diameter or 1" Diameter (With customer supplied materials) Polyethylene Water Pipes.
Energy Saving Thermostat With a 10 Foot Sensor Senses The Pipe Temperature and Turns The Cable On/off As Required
Protected by Ground Fault Circuit Interrupter GFCI with Test/Reset and Pilot Light to Ensure Safe Operation
CSA Approved For Drinking Water Supply
Comprehensive Length Selection From 10 to 270 Foot
Non-Restrictive Fitting (No 90° Turn) T-Assembly Utilizes The Philmac Fitting to Eliminate The Potential Problems Adapter Fittings Can Create
Will Not Burn Through Pipe If Dryout Cccurs (See Instructions)
User Friendly Plug-In 120 Volt Operation (5W/ft) to Plug in The System to Any 120 Volt Outlet
Maximum Amperage Draw is 11.3 Amps (On 270 Foot Long Model)
An Inside-The-Pipe Heater Cable That Provides an Economical Alternative to Maintaining Running Water All Winter Long
Can be Used in Insulated Pipes
The Package Doubles as a Dispensing Reel Ensuring a Smooth Transfer From Reel to Pipe and Cable Flexibility Ensures Easy Installation, The Cable Can Easily be Pulled Around Sharp Elbows and Curves
Water Supply Line Applications Only (Not Designed For Drain Lines or Other Applications)