Questions? 1-800-442-2581
or 1-616-784-1121
8:00 am - 5:00 pm M-F EST
8:00 am - 1:00 pm Sat. EST
 
 
Share |
 
$25 or Less Products
Baseboard Space Heaters
Camp, Fish, Hunt & RV
Church Baptistry Heaters
Clearance & Specials
Comfort Space Heaters
Construction Heaters
Controls & Transformers
Cooling/Air Conditioning
Fans/Blowers/Ventilation
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers (Washrooms)
Heaters & Accessories
Heating Cable & Mats
High Temp. Insulation
High Temp. Wire & Acces.
Industrial Heating Products
Infrared Radiant Heaters
Lighting & Flashlights
Manufacturers (Vendors)
Nichrome Wire Coils & Acc
Patio Heaters (Radiant)
Pipe Freeze Protection
Portable Space Heaters
Replacement Repair Parts
Roof & Gutter Deicing
Snow & Ice Removal
Tapes-Fiberglass/Aluminum
Temperature Sensors
Thermostats & Accessories
Tools, Instruments & Gear
Unit Heaters (Blower)
Wall Heaters (Fan-forced)
Wall Panel Convectors
Water Heaters (Tankless)
ITEM # QTY.
Results
You searched for: ETI ES-1 Rain/Snow Interface For Building Automation, 12-15 VDC, Separate isolated reed relays signal rain & snow
Results Displayed: 1 - 1 of 1

ETI ES-1 Rain/Snow Interface For Building Automation, 12-15 VDC, Separate isolated reed relays signal rain & snow


Description


The Model ES–1 Rain/Snow Interface answers the need for reliable low cost means of determining environmental conditions for commercial and residential building automation systems employing computer or PLC control. Typical of numerous applications include controlling snow melting, awnings and surface water.

The computer controlled ES–1 provides separate isolated reed relays to signal rain and snow. The rain relay operates during precipitation at temperatures above 32°F (0°C) and the snow relay operates during precipitation at temperatures below 38°F (3.3°C). The ES–1 considers both rain and snow as likely during precipitation at temperatures between 32°F (0°C) and 38°F (3.3°C). The overlap is critical to the control of snow melting systems during the spring and fall when accumulations occur at temperatures above freezing.

The relay contacts provide a simple means for connecting the ES–1 to building automation computers and PLCs in both commercial and residential applications. The NEC Class 2 U-L Listed outlet power supply included can provide the 12 to 15 volt 5 watt d.c. required by the ES–1.

The ES–1 uses customer supplied 1/2" conduit as a mounting means. The interface is placed outdoors at a location exposed to snow and rain but protected from vandalism.

















Installation Instructions
Data Sheet
Item CodeDescriptionVendorQuantity
ETI17894
ES-1 Rain/Snow Interface 12-15 VDC
ETI (Environmental Technology Inc.) - For Building Automation, 12-15 VDC, Separate isolated reed relays signal rain & snow
ETI (Environmental Tech.)