Questions? 1-800-442-2581
or 1-616-784-1121
8:00am-5:00pm M-F (Eastern Time)
 
 
Share |
 
Refine Results Clear All
Product Types
Embedded Snow Melting Mats
Snow Melting Mats
Voltage
240 Volt
Phase
1 Phase
Price
$100 to $150
$150 to $250
Length
8 Ft
Width
18 Inch
Vendors
Easy Heat
Product Types
Select Product Types Clear
 Embedded Snow Melting Mats (6)
 Snow Melting Mats (6)
Voltage
Select Voltage Clear
 240 Volt (6)
Phase
Select Phase Clear
 1 Phase (6)
Price
Select Price Clear
 $100 to $150 (1)
 $150 to $250 (5)
Length
Select Length Clear
 8 Ft (6)
Width
Select Width Clear
 18 Inch (6)
Vendors
Select Vendors Clear
 Easy Heat (6)
Air Conditioning
Baseboard Heaters
Clearance & Specials
Comfort Heaters
Controls & Transformers
Fans & Ventilation
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers
Heaters & Parts
Heating Cable
High Temp. Insulation
High Temp. Wire & Acces.
Infrared Radiant Heaters
Lighting & Flashlights
Manufacturers
Nichrome Wire Coils & Acc
Patio Heaters - Radiant
Pipe Freeze Protection
Portable Heaters
Replacement Parts
Roof & Gutter Deicing
Snow & Ice Removal
Tapes-Fiberglass/Aluminum
Temperature Sensors
Thermostats & Accessories
Tools & Gear
Unit Heaters
Wall Heaters
ITEM # QTY.
Results
You searched for: 8ft Long x 18 Inch Wide Snow Melt Mats
Results Displayed: 1 - 7 of 7

EasyHeat Sno*Melter Electric Snow Melting Mats


 


Description


Combined with the intelligence of snow melting controls, Sno*Melter Mats provide the ultimate in economical, worry free and reliable snow and ice removal. Installed beneath the surface and appropriately controlled, these cables will heat the surface area above freezing, thereby melting any snow or ice. Pedestrians and vehicles can then move securely on the protected surface.


Sno*Melter electric mats are designed to be embedded in concrete or asphalt, either as part of a new installation or when re-paving. Because the snow melting mats operate for relatively short periods each winter, operating costs are less than most other
snow and ice removal methods.

 


Where to use Sno*Melter


  • Custom, Single Family Dwellings

  • Condominiums and Villas

  • Pedestrian Accessibility Ramps

  • Hospitality Pick-Up/Drop-Off Zones

  • Multi-Deck Parking Facility Ramps

  • Passenger Platforms For Bus Stations and Train Depots

  • Heliports and Hangar Door Rails

  • Loading Docks

  • EMS/Ambulance Entrances For Hospitals and Firehouses

  • Roads, Bridges, Tunnels, Weigh Scales, Automotive Transaction Facilities

Operating costs for your area will depend upon the total hours of snowfall and upon the heating capacity you specify. Our recommended heat density of 50 watts (nominal) per square foot provides quick response time, especially when used with automatic control. In most cases, snow will melt at a rate that keeps up with average snowfall, minimizing accumulation of snow on the heated surface. In a heavy snowfall, when snow accumulates at a faster rate, extra heating time will be required for complete removal. Automatic control, set to allow additional running time after snowfall stops, ensures drying the pavement and minimizes icy spots. An electric snow melting system is a practical, economical way of preventing the build-up of ice and snow on steps, walkways, driveways, parking areas, loading docks and even roads.















Brochure
Cost Effective Sheet
Specifications
Installation Instructions
Item CodeDescriptionVendorQuantity
EASY10128
NMPLT UL Required SnoMelter NameplateEasyheat Inc
EASY10223
G08X18-2-50-20A 240V 20ft cold leadsEasyheat Inc
EASY10503
G08X18-2-50-30A 240V 30ft cold leadsEasyheat Inc
EASY10504
G08X18-2-50-40A 240V 40ft cold leadsEasyheat Inc
EASY10505
G08X18-2-50-50A 240V 50ft cold leadsEasyheat Inc
EASY10506
G08X18-2-50-60A 240V 60ft cold leadsEasyheat Inc
EASY10549
G08X18-2-50-70A 240V 70ft cold leadsEasyheat Inc