Results You searched for: Cadet Hot One - 240V RCP Series. Great for garages and shops Results Displayed: 1 - 2 of 2
Cadet Hot One - RCP Series. Great for garages and shops.
RCP502S 5000-Watt Portable Garage Heater - Cadet Hot One 5000 Watt 240 Volt Portable Garage & Shop Electric Heater. The Hot One provides warmth for large areas that are often difficult to heat like garages and workshops, and is built in the USA with rugged, durable construction. Equipped with fan delay mechanism that eliminates cold startups and disperses all residual heat.
5000 Watts at 240 volts provides warmth for large hard to heat areas like garages and workshops
Includes built-in fan only switch to provide comfortable air circulation without heat
Factory equipped with bracket for wall mount or floor stand use; high mass, tubular element for long life
Double pole thermostatic control offers positive off position
6 foot cord with polarized plug requires NEMA #6-30 240 Volt Receptacle
Includes fan delay mechanism to allow the element to heat before blowing air, to eliminate cold startups
High temperature manual reset turns heater off if normal operating temperature is exceeded
Warranty: 5 year warranty
The Hot One 240 volt portable heater is designed with the same rugged construction as Cadet's commercial unit heater line. It provides warmth for large areas that are often difficult to heat, like garages and workshops. The fan delay mechanism, standard on all units, allows the element to heat before blowing air, thereby eliminating cold startups. It also delays the shutdown of the fan after the element turns off to disperse residual heat. The Hot One® comes factory equipped with a bracket for either wall mount or floor stand use (non-marking rubber pads are included on the mounting bracket). The area must be equipped with an accessible 240 volt receptacle.
Architectural Information: Portable fan unit heater shall be UL Listed and rated at 240V. External cabinet shall be constructed of 20 gauge high quality steel and shall be finished with a baked on powder coat paint. Fan shall be aluminum blade axial flow type, and mounted directly to the motor shaft. Motor shall be shaded pole with ball bearings. Heating elements shall be sealed in magnesium oxide powder and protected by metal sheathing and aluminum fins. Heater shall be equipped with manual reset thermal cut out for over temperature protection. Fan motor circuits shall be thermostatically controlled with fan delay.
Technical Information: The Hot One® 240 volt heater is available in 5,000 watts (3,333 low setting). It also includes a fan switch for air circulation without heat. All units include a built-in double pole thermostat. UL requires a 3' minimum clearance from front. For optimum performance Cadet recommends 6" from back and top, and 12" from sides.