Questions? 1-800-442-2581
or 1-616-784-1121
8:00am-5:00pm M-F (Eastern Time)
Share |
Air Circulator Fans
Air Doors/Air Curtains
Baptistry Heaters for Churches
Baseboard Space Heaters
Bathroom Fans
Blowers (Portable Utility)
Camp, Fish, Hunt & RV
Ceiling Fans (Commercial/Ind)
Clearance & Specials
Comfort Space Heaters
Construction Heaters
Controls & Transformers
Drum Blowers (Portable)
Evaporative Coolers
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers (Washrooms)
Heaters & Accessories
Heating Cable & Mats
High Temp. Wire & Acces.
Industrial Heating Products
Infrared Radiant Heaters
Lighting & Flashlights
Loading Dock Fans
Manufacturers (Vendors)
Nichrome Wire Coils & Acc.
Patio Heaters (Radiant)
Pest/Bird/Animal/Insect Control
Pipe Cable (Constant Wattage)
Pipe Cable (Self-Regulating)
Pipe Trace Freeze Protection
Portable 120V Space Heaters
Portable 240V Space Heaters
Replacement Repair Parts
Roof & Attic Ventilators
Roof & Gutter Deicing Cable
Roof Cable (Constant Wattage)
Roof Cable (Self-Regulating)
Snow & Ice Removal
Tapes (Adhesive)
Temperature Sensors
Thermostats & Accessories
Tools, Glue, Lights & Gear
Unit Heaters (Blower)
Wall Exhaust Fans
Wall Heaters (Fan-forced)
Wall Panel Convectors
Water Heaters (Tankless)
Whole House Fans
You searched for: MUH Series 208/240V 1/3Ph Unit Heaters
Results Displayed: 1 - 3 of 3
Qmark type MUH unit heater. For use factories, warehouses, garages, stores, shipping rooms, power stations, and aircraft hangers. Can be used for primary, supplementary, spot, or dual-system heating.

- Totally versatile. Unit can be mounted either horizontally or vertically.
- Wide range of optional control kits are field installable, increasing the MUH adaptability to the specification market.
- Forced air unit heater with 10 power ratings; from 3KW to 50 KW heating output; 208, 240, 277 and 480V, 10,230 to 170,500 BTU/hr.
- 32 compatible models (no need to try to assemble a heating system from 70 or 80 models!)
- Heavy gauge die-formed steel housing. Two-toned, smartly styled
- Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation.
- Specially designed venturi outlet to meet that added throw as required in vertical position.
- Branch circuit fusing (when required). Completely enclosed fan motor.
- 1or 3-phase wiring on 5 through 10 KW 208/240V and 15 KW 208V units (field interchangeable)
- Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation.
- 24V control transformer standard on most models providing a safer and more accurate means of temperature control. 3KW and 5KW, 208-277V, have line voltage controls as standard (24V control available on made-to-order basis).
- Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to-order basis).
- 2 speed fan selector switch (25 to 50 KW models).
- Fan delay feature eliminates cold drafts. Element heats up before fan cuts in then fan continues to distribute heat after element shuts off.
- Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps.
- Individually adjustable discharge louvers to control air flow.
- Choice of optional diffusers for variety of air patterns, maximizing heat concentration and coverage in the vertical position.
- Meets all UL, NEC, and OSHA requirements.
- UL listed

Link to Product Information Page on
Installation and Maintenance Instructions
Product Bulletin
Submittal Sheet
Replacement Parts
Item CodeDescriptionVendorQuantity
MUH0521 Qmark Unit Heater
Qmark/Marley Type MUH Series Unit Heaters - 208/240 Volt 1-3 Phase 3.7/5KW - 350 CFM - 45F Temp Rise - 12ft Air Throw - 208/240V Control Voltage
MUH072 Qmark Unit Heater
Qmark/Marley Type MUH Series Unit Heaters - 208/240 Volt 1-3 Phase 5.6/7.5KW - 650 CFM - 37F Temp Rise - 18ft Air Throw - 24V Control Voltage
MUH102 Qmark Unit Heater
Qmark/Marley Type MUH Series Unit Heaters - 208/240 Volt 1-3 Phase 7.5/10KW - 650 CFM - 49F Temp Rise - 18ft Air Throw - 24V Control Voltage