Questions? 1-800-442-2581
or 1-616-784-1121
8:00am-5:00pm M-F (Eastern Time)
Share |
Air Circulator Fans
Air Doors/Air Curtains
Baptistry Heaters for Churches
Baseboard Space Heaters
Bathroom Fans
Blowers (Portable Utility)
Camp, Fish, Hunt & RV
Ceiling Fans (Commercial/Ind)
Clearance & Specials
Comfort Space Heaters
Construction Heaters
Controls & Transformers
Drum Blowers (Portable)
Evaporative Coolers
Floor Warming Mats/Cables
Garage & Shop Heaters
Garden & Outdoor Items
Hand Dryers (Washrooms)
Heaters & Accessories
Heating Cable & Mats
High Temp. Wire & Acces.
Industrial Heating Products
Infrared Radiant Heaters
Lighting & Flashlights
Loading Dock Fans
Manufacturers (Vendors)
Nichrome Wire Coils & Acc.
Patio Heaters (Radiant)
Pest/Bird/Animal/Insect Control
Pipe Cable (Constant Wattage)
Pipe Cable (Self-Regulating)
Pipe Trace Freeze Protection
Portable 120V Space Heaters
Portable 240V Space Heaters
Replacement Repair Parts
Roof & Attic Ventilators
Roof & Gutter Deicing Cable
Roof Cable (Constant Wattage)
Roof Cable (Self-Regulating)
Snow & Ice Removal
Tapes (Adhesive)
Temperature Sensors
Thermostats & Accessories
Tools, Glue, Lights & Gear
Unit Heaters (Blower)
Wall Exhaust Fans
Wall Heaters (Fan-forced)
Wall Panel Convectors
Water Heaters (Tankless)
Whole House Fans
You searched for: DAW Series 240 Volt Wall Heaters
Results Displayed: 1 - 2 of 2
A heavy duty industrial switch mounted on the grill allows easy choice of 7 different heat settings with ease. Use where higher wattage is not required during unoccupied periods and freeze protection may be achieved with energy savings. Quiet operating tangential blower and commercial grade element make the Dial-A-Watt the heater of choice for people on the move.

Typical installations are toll booths, motor home/RV, pleasure craft, and cabins. By providing air movement and dry heat, must and mold odors are reduced and interior fabric life is maximized.

During use, the heater load (Amperage) can be adjusted to the receptacle or cord size that is feeding the RV. This prevents damage to plugs and receptacles due to over loading. During lay-up periods, wattage can be adjusted to the correct level.

* Pic-A-Watt® Element
* C-Frame Motor
* Squirrel Cage Blower
* Quiet Running
* Dial-A-Watt Switch
* Multiple Wattage Selection
* 20 Gauge Powder Coated Grill with contemporary die formed round corners.
* Standard Color - Bright White
* Green Pilot Light indicates when heat is on.
* Bimetallic limit turns the element off when an over temperature condition occurs and automatically
resets when the normal temperature returns or is manually reset by thermostat.
* 1-Pole or 2-Pole unit mount thermostat 45°- 80°F
* Optional Surface Wall Box
* Available in Stainless Steel

Ratings: Heaters shall be available in wattages of 250 to 2,250 at 120, 208, 240, or 277 volts.

Blower and Motor: A tangential cylindrical blower, delivering 65 CFM, shall be driven by a shaded pole, permanently lubricated, C-frame type motor with impedance protection and sealed bearings. Motors shall be the same voltage as the heater.

Elements: Elements assemblies shall be non-glowing design. Element assemblies shall consisting of three steel sheathed heating tubes in a furnace brazed, plate finned, block design. Each sheathed tube shall contain coiled Ni-Chrome wire, embedded in an insulator of magnesium oxide. The element assembly shall provide a minimum of seven (7) possible wattage configurations available for selection during field installation. The use of external resistors, diodes, or other weak links to obtain multiple wattages will not be acceptable.

Thermal Overload: Heaters shall be equipped with thermal overload protection, which disconnects elements in the event normal operating temperatures are exceeded. The thermal overload protection
device shall automatically reset when normal operating temperatures are reached or manually reset by the thermostat.

Wall Can: The wall can shall be 20 gauge electro-galvanized steel and shall contain a minimum of three (3) knockouts through which power leads are brought. The wall can shall have a depth gauge indicator, and a factory installed insulated and stranded copper grounding wire. Minimum Clearance to Floors and Sidewalls. Zero clearance to combustibles.

Grill: The grill shall be louvered, one piece design with rounded edges on all four sides, with rounded corners to prevent snags from contact with other materials. The grill shall be epoxy powder coated in the color specified on the plans.

Approval: Heaters shall be listed and approved by Underwriters Laboratories or equal.

Selector Switch: Shall provide 7 wattage settings adjustable from switch on front of heater.

Indicator: Light designates heater is operating.

Catalog Page
Installation Instructions
Item CodeDescriptionVendorQuantity
DAW2422-SS King Electric Wall Heater
King Electric Wall Heater - DAW (Dial-A-Watt) Series - Dial A Watt Switch - 240 Volt With Wattages of 500/750/1000/1250/1500/1750/2250 Watt - Stainless Steel Construction - Includes Wall Can and Stainless Steel Grill
King Electric
DAW2422-W King Electric Wall Heater
King Electric Wall Heater - DAW (Dial-A-Watt) Series - Dial A Watt Switch - 240 Volt With Wattages of 500/750/1000/1250/1500/1750/2250 Watt - Includes Wall Can and Bright White Colored Grill
King Electric